For 1917 ALF Type 17-6 TDA (10-29-17)

Needed for restoration of 1917 ALF Type 17-6 TDA. These parts are from the American Automatic Aerial Ladder so parts from ALF Type 31s should work up until the late 20s when ALF beefed up the supports/brackets. There are 5 pairs of truss supports along the top of the ladder. They go down in size from the base of the ladder to the tip. I have the first 2 pairs. They are 9″ and 7-1/2″ from bottom of base to center of the truss rod. I need the
other 3 pairs that are 6″, 4″, and 2-1/2″ respectively. The truss rod is 5/8″ dia. and the hole for the rod in the bracket is 3/4″. The truss support rods run along the top of the beams of the bed section of the aerial from the raising mechanism at the base to the tip.
Jon Wagner
Reno, NV

Wanted Category: Other Items.